How To Put Back A Sink Faucet Screen

How to Supervene upon a Kitchen Faucet

Kitchen faucets are probably ane of the most used fixtures in homes. Many times a solar day the water is turned on and off, leading to quite a bit of wear and tear on this hardworking fixture. If your faucet has seen better days, or is out of style, you can replace it with a shiny new version using but a few tools. Exchanging your one-time kitchen faucet with a new ane tin transform the look and functionality of your kitchen in merely a couple of hours.

Tools you'll Need

Have all the necessary tools for this DIY project lined up before you start to salvage yourself fourth dimension and frustration.

New Faucet
Channel locking pliers
Basin wrench
Plumber'south Putty
Adjustable Wrench
Flexible supply lines
Tape Mensurate

Before Starting

Plough off the hot and cold water close-off valves. they're usually located in the cabinet that'southward under the sink. And then open up the faucet to relieve pressure.

Removing the Erstwhile Faucet

Stride One: Using an adjustable wrench and a pair of channel locking pliers, disconnect both the h2o lines from the faucet. If the supply lines are old, or the gaskets are worn out, you may want to supercede them with flexible supply lines.
Step Ii: Using a socket wrench or basin wrench remove the nut that is holding the faucet tailpiece assembly in place. Sometimes it'due south difficult to loosen old faucet nuts, in that case endeavor soaking the threads with penetrating oil and attempt again.
Stride Iii: If your sink has a line that connects the hose to the faucet yous tin can disconnect this.
Step Iv: Pull the old faucet out and clean the sink's surface making sure to remove any rust or caked on debris.

Installing the New Faucet

Footstep One: Using the measuring tape, measure the distance, from center to center, of the outside holes of your sink. This is to make certain the new faucet will fit. Since all faucets are slightly unlike, read any installation instructions that come up with your new faucet. Follow all manufacturer's pre-associates instructions and place the optional flange over the faucet opening.
Pace Ii: Seal the new faucet. If y'all're using a gasket, place the gasket on the lip of the plate and thread the hoses through. If using plumber'due south putty, apply information technology around the base of operations of the faucet and fix the faucet in place.
Footstep Three: Under the sink you can now thread on the flange and nut using a socket or basin wrench.
Step Iv: If you're using pull-out faucets, a weight needs to be added that will retract the pull-out spray.
Step Five: Now it'due south fourth dimension to attach the supply lines to the faucet and then to the close-off valves. Common cold water connects on the correct and hot water on the left.
Step Six: Turn on the h2o and check for leaking. If you discover any leaks yous'll need to tighten the connections on the water supply line.